Call Us Today   877.820.6301
The AFP-SQ plate satisfies the severest criteria of quality in printing corrugated board,solid board and heavy-duty bags.

The surface unevenness of the printing material is compensated by the ideal shore hardness and the restoring behaviour of the AFP-SQ plate.

The wide exposure latitude of the AFP-SQ plate ensures that image elements like 3% tones and isolated lines 250┬Ám are optimally anchored even with a relief depth of 3mm (0.118"). At the same time, intermediate depths form evenly and the relief is produced with steep shoulders.

  • Wide exposure latitude
  • Optimum intermediate depths
  • Steep relief shoulders
  • Shorter processing time
  • Excellent ink transfer
  • Superb ink coverage
AFP-SQ  Soft and thick plate for corrugated board and paper sacks printing


Plate Thickness
2.84mm; 3.18mm; 3.94mm; 4.70mm; 5.00mm; 6.35mm or 0.112"; 0.125"; 0.155"; 0.185"; 0.197"; 0.250"
Inks and Solvents
The AFP-SQ plate is suitable for use with flexo inks based on alcohole or water. It is permissible to use solvent mixtures containing a limited amount of active solvents (ethyl acetate content-preferably under 10%).
Storage of Raw Plates
AFP-SQ plates should be stored at a room temperature of 5-25°C and relative humidity of 55%.
Storage of Used Plates
Careful cleaning of the plates after printing is recommended. Direct exposure to sunlight, heat and high concentrations of ozone should be avoided.
© 2012-13 Correct-Touch™ Graphic Arts. All rights reserved.
4349 Old Santa Fe Road, San Luis Obispo, CA 93401
toll free 877.820.6301 |  fax 805.546.3349  |  info@ctgraphicarts.com