THE ASAHI AWP-DEW 4260 PLF
FLEXO WATER WASH PLATEMAKING EQUIPMENT
AWP 2530 AA
The All-In-One AWP™ 2530 AA is designed for the challenging demand of the highest quality customer. The combination of processor and plate technology is engineered to deliver a sustainable quality output of vivid colors and higher quality screening technologies. At the same time the AWP™ 2530 Auto water processor is presenting an environmentally sound solution aiming to drive print forward in balance with the environment.
TECHNICAL SPECIFICATIONS
EXPOSURE UNIT:
Lamps: 13 x 60W10R (with pilot lamps)
UV power: Average 12mw/cm² (ORC UV meter)
UV repartition: 91%
Light integrator
No vacuum pump
PROCESSOR:
Wash out process: BatchSticky plate
Wash out section:7 x flat brushes
Cleaning section:1 x Rotary brush (up and down position) with doctor blade
1 x Air knife
1 x spray bar (fresh solution on the rotary brush)
1 x spray bar with fresh water
1 x sponge rollWash out tank capacity: 130 liters
Exhaust pipe: Diameter 80mm
DRYER UNIT:
1 x drawer
Temperature adjustment on the touch panel
PROCESSOR:
Wash out process: BatchSticky plate
Wash out section:7 x flat brushes
Cleaning section:1 x Rotary brush (up and down position) with doctor blade
1 x Air knife
1 x spray bar (fresh solution on the rotary brush)
1 x spray bar with fresh water
1 x sponge rollWash out tank capacity: 130 liters
Exhaust pipe: Diameter 80mm
PROCESSOR:
Wash out process: BatchSticky plate
Wash out section:7 x flat brushes
Cleaning section:1 x Rotary brush (up and down position) with doctor blade
1 x Air knife
1 x spray bar (fresh solution on the rotary brush)
1 x spray bar with fresh water
1 x sponge rollWash out tank capacity: 130 liters
Exhaust pipe: Diameter 80mm